How to relocate a baby grand piano

Pianos regularly make movers yearly list of products that are most frequently harmed. Grand pianos are specifically bothersome. Practicing the following procedures for taking apart, padding and loading grand pianos will avoid damage, lower claims expenditure, and enhance client complete satisfaction.

1) At least three individuals are required to handle an infant grand piano. If the child grand piano requires to go up or down stairs or if a full or performance grand piano requires to be carried, a minimum of four individuals are needed.

2) Always finish a precise and extensive stock. It may be required or more suitable to use a visual stock to properly describe and reveal pre-existing damage.

3) As various parts are taken apart, please location all hardware in a properly identified parts bag and then put the parts bag in a "Parts Box".

4) Remove the music rack (lyre) from its track by pulling it towards the keyboard. Wrap it in a clean furniture pad.

5) Disconnect the cover by getting rid of the hinge pins. Have a single person wiggle the lid, holding it opposite the hinge, while a 2nd individual works the pin loose. Please beware not to harm the wood with the pliers or with the pin itself. If required, cover the jaws of the pliers with a little fabric to assist prevent damage to the wood. Wrap the lid in a clean furnishings pad.

6) Eliminate the prop that holds the cover open and cover it in a tidy furnishings pad. The prop has a hinge pin and remains in two pieces.

7) Remove the pedal assembly and wrap it in a clean furniture pad. The braces at the rear of the assembly rest in slots at each end. When removing the screws, please be cautious not to drop the braces. In addition, please be particularly cautious with the push-rods so that they will not get bent. As you face the piano, number the push-rods from left to right as "1", "2", and "3", by placing a piece of masking tape with the proper number on each rod. Note: If masking tape is unavailable, please use correctly labeled parts bags for this purpose. When reassembling at location, please make certain to put the rods in the proper order so that the pedals will work effectively.

8) Pad the piano by putting a clean rolled furniture pad (stretch-wrap the pad to avoid it from unrolling) on the cover of the keyboard to prevent it from tumbling open while you handle the piano. Cover the top of the More Bonuses piano with two tidy furniture pads, nicely folded around the keyboard. Use elastic band to secure the pads. Note: Please guarantee that the surface of the piano is dust-free prior to padding it. Padding a highly sleek surface area that is dusty might cause fine scratches, specifically on a black lacquer finish.

9) Position a piano board and attach the straps so that it is prepared to get the piano. The raised brace on the piano board should be at the keyboard end of the piano.

10) Remove the left front leg by positioning one person underneath the piano at the left end of the keyboard. Be sure to have 2 people lifting the corner of the piano while the 3rd person removes the leg. Note: Please be sure to keep in mind which legs were gotten rid of from which positions considering that some pianos have legs that are not interchangeable.

11) Place the piano on the piano board by lowering the "leg-less" end onto the board. Please make certain to lift the entire piano a little while completing this maneuver to avoid unnecessary pressure on the remaining, attached legs as the piano pointers. Lift the piano to an upright position on the board. Keep in mind: Please guarantee that the soundboard is secure before raising. Make sure that the piano is centered comfortably against the brace at the navigate here end of the piano board. Keep in mind: Never leave the piano ignored. Constantly have at least one person holding the piano constant at all times.

12) Eliminate the 2 remaining legs and wrap them in clean furnishings pads. These legs are kept in location by a "crucial and slot" arrangement. To remove the leg, slide it inward towards the center of the piano up until it comes out of the slot.

13) Protect the piano to the piano board by bringing the ends of the straps together and attaching them. Place folded burlap pads over the furnishings pads however under the straps to supply extra defense to the edges of the piano. To avoid the strap near the narrow end of the piano from slipping off, connect the loose ends of the 2 straps together.

14) To move the piano over a flat, level surface, tilt the piano and piano board and place a four-wheel dolly under the center of the piano board.

15) To move the piano up or down stairs, use the piano board as a skid. After adequately padding the stairs for defense versus home damage, put the keyboard end of the piano toward the bottom of the stairs. Connect a hump strap to the top end of the piano board to avoid the piano from slipping.

16) To fill the piano, leave it on the piano board and location it page in a tier as the first base product with the keyboard dealing with the wall of the preceding tier. The very best location to fill the padded lid is in between the piano and the preceding tier or between the piano and the wall.

Grand pianos represent a substantial difficulty, they can be moved without damage by using typical sense and practicing the procedures noted above.

Leave a Reply

Your email address will not be published. Required fields are marked *